Ensure blocks and surfaces are clean, free from dust, grease, and loose particles.

Moisten the surface slightly if required, as per the adhesive manufacturer’s guidelines.

Follow the manufacturer's instructions for water-to-adhesive ratio to achieve the correct consistency.

Use a notched trowel or a flat spatula to spread the adhesive evenly for uniform bonding.

Position blocks correctly and press gently to ensure proper alignment and bonding.

Prepare only the amount of adhesive that can be applied within its pot life (usable time).

Follow the recommended curing time before subjecting the structure to load or further construction activities.

Use a spirit level and a rubber mallet to adjust and align blocks without damaging them.

Avoid applying adhesive on dirty or uneven surfaces as it compromises adhesion.

Over-diluting the adhesive weakens its bonding strength and affects durability.

Ensure complete coverage of adhesive to avoid hollow spaces that can weaken the structure.

Avoid using adhesive on water-saturated blocks or substrates.

Do not let the adhesive dry out before placing the blocks, as this reduces bonding strength.

Always check the expiration date and storage conditions of the adhesive before use.

Avoid exposing the adhesive to excessive load or stress before the curing process is complete.